optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 02/2013 page 1 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. wide gap slotted optical switch OPB800 & opb810 (l and w series) part number guide opb 8 x x x x x z for ?w? series only optek assembly sensor aperture: 1 ? 0.010? (.254 mm) 5 ? 0.050? (1.270 mm) phototransistor output family emitter aperture: 5 ? 0.050? (1.270 mm) discrete shell material: mounting configurations: 0 ? transmissive plastic l ? solder lead termination discrete shell w ? wire termination 1 ? opaque plastic discrete shell features: ? 0.375? (9.525 mm) wide gap ? choice of aperture size ? choice of minimum photocurrent ? choice of opaque or ir transmissive shells ? available for pcboard mounting or with 24? 26 awg wires product photo here w package l package description: the OPB800l series, pcboard mounting, of wi de gap switch provides the flexib ility of a custom device from a standard product line, while the OPB800w series, remote mounted, switch offers 24? (610 mm) 26 awg wire interconnect. building from a standard housing that utilizes a 0.375? (9.5 mm) wide slot, a user can spec ify the electrical output parameters, discrete shell mate rial and the aperture width. housings are made from an opaque grade of injection-molded plastic that minimizes the assembly?s sensitivity to visible and near-infrared ambient radiation. discrete shells, which are exposed on parallel faces inside the device throat, are made of ir transmissive plastic (for applic ations where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). custom electrical, wire and cabling and connectors are ava ilable. contact your local representative or optek for more information. applications: ? non-contact interrupt ive object sensing ? assembly line automation ? machine automation ? equipment security ? machine safety rohs electrical specification variations: 0 = electrical parameter a 1 = electrical parameter b 2 = electrical parameter c note: assemblies with 0.010? apertures are currently available with electrical parameter ?a? only. wires = 26awg?24? long
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 02/2013 page 2 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. wide gap slotted optical switch OPB800 & opb810 (l and w series) absolute maximum ratings (t a =25c unless otherwise noted) storage and operat ing temperature l series w series -40 c to +85 c -40 c to +80 c lead soldering temperature [1/ 16 inch (1.6mm) from the case fo r 5 sec. with soldering iron] (2) 260 c input diode forward dc current 50 ma reverse dc voltage 2 v power dissipation (1) 100 mw output phototransistor collector-emitter voltage 30 v emitter-collector voltage 5 v power dissipation (1) 100 mw peak forward current (1 s pulse width, 300 pps) 3 a collector dc current 30 ma color/pin # description red-1 anode black-2 cathode white-3 collector green-4 emitter 1 2 3 4 dimensions are in: inches [ millimeters] wired (w) version
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 02/2013 page 3 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. wide gap slotted optical switch OPB800 & opb810 (l and w series) notes: (1) derate linearly 1.67 mw/ c above 25 c. (2) rma flux is recommended. duration can be exten ded to 10 seconds maximum when flow soldering. (3) all parameters tested using pulse technique. (4) methanol or isopropanol are recommended as cleaning agents. pl astic housing is soluble in ch lorinated hydrocarbons and ket ones. (5) the w series includes wire terminations of 24? (610 mm) 7- strand, 26 awg ul insulated wire on each terminal. each device incorporates a wire strain relief at the housing surface. t he insulation functions and colors are: anode (red), cathode (blac k), phototransistor collector (white) a nd phototransistor emitter (green). electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions input diode v f forward voltage - - 1.7 v i f = 20 ma i r reverse current - - 100 a v r = 2 v output phototransistor v (br)ceo collector-emitter breakdown voltage 30 - - v i c = 1 ma v (br)eco emitter-collector breakdown voltage 5 - - v i e = 100 a i ceo collector-emitter dark current - - 100 na v ce = 10 v v ce(sat) collector-emitter sa turation voltage parameter a (OPB800,opb810) parameter b (opb801,opb811) parameter c (opb802,opb812) - - - - - - 0.4 0.4 0.6 v v v i c = 250 a, i f = 20 ma i c = 500 a, i f = 10 ma i c = 1800 a, i f = 20 ma i c(on) on-state collector current parameter a (OPB800,opb810) parameter b (opb801,opb811) parameter c (opb802,opb812) 0.625 1.25 2.25 - - - - - - ma v ce = 10 v, i f = 20 ma v ce = 5 v, i f = 10 ma v ce = 0.6 v, i f = 20 ma combined
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 02/2013 page 4 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. wide gap slotted optical switch OPB800 & opb810 (l and w series) OPB800_51 - flag in middle of slot 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 distance (inches) normalized i c(on) response right to left left to right top to bottom left to ri g ht right to left to p to OPB800_51 - flag next to sensor 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) normalized i c(on) response right to left left to right top to bottom left to ri g ht right to left to p to bottom emitter sensor left to right right to left 0 width top to bottom 0 OPB800_51 - flag next to emitter 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 distance (inches) normalized i c(on) response right to left left to right top to bottom left to ri g ht right to left to p to
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue b 02/2013 page 5 of 5 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. wide gap slotted optical switch OPB800 & opb810 (l and w series) OPB800_55 - flag in middle of slot 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 distance (inches) typical i c(on) response (ma) right to left left to right top to bottom left to ri g ht right to left to p to OPB800_55 - flag next to sensor 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 distance (inches) normalized i c(on) response right to left left to right top to bottom left to ri g ht right to left to p to OPB800_55 - flag next to emitter 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.00 0.05 0.10 0.15 0.20 0.25 distance (inches) normalized i c(on) response right to left left to right top to bottom left to ri g ht right to left to p to emitter sensor left to right right to left 0 width top to bottom 0
|
